LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Trim And Paneling >> Repair Instructions >> Windshield Pillar Garnish Molding Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Garnish Molding - Windshield Pillar
    GM714026Courtesy of GENERAL MOTORS CORP.
  1. Starting at the top of the garnish molding, carefully release the upper attaching clip that retains the garnish molding to the first pillar.
  2. Release the remaining 2 retaining clips from the first pillar.
  3. Remove the garnish molding (1) from the vehicle.
scientia non olet · About LEMON Manuals