LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim >> Repair Instructions >> Rocker Molding Scuff Plate Replacement - Front >> Removal Procedure

Removal Procedure

  1. Open the front door.
    2. Fig 1: Identifying Rocker Molding Scuff Plate
    GM750773Courtesy of GENERAL MOTORS CORP.
  2. Starting at the rear of the rocker molding scuff plate and working forward, lift upwards on the scuff plate to release the retaining tabs.
  3. Remove the scuff plate from the vehicle.
scientia non olet · About LEMON Manuals