LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim >> Repair Instructions >> Rear Panel Molding Replacement >> Removal Procedure

Removal Procedure

  1. Remove the tail lamp assembly from the vehicle. Refer to Tail Lamp Replacement (Isuzu) or Tail Lamp Replacement (TrailBlazer) .
    2. Fig 1: Identifying Tail Lamp Trim
    GM741241Courtesy of GENERAL MOTORS CORP.
  2. Release the 4 tabs that retain the trim to the tail lamp.
  3. Remove the trim from the tail lamp.
scientia non olet · About LEMON Manuals