LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim >> Repair Instructions >> Liftgate Window Side Reveal Molding Sealing Strip Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Side Reveal Molding
    GM721401Courtesy of GENERAL MOTORS CORP.
  1. Open the liftgate.
  2. Release the 5 clips that retain the reveal molding to the body.
  3. Peel the reveal molding away from the body and remove from the vehicle.
scientia non olet · About LEMON Manuals