LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim >> Repair Instructions >> Hood Front Molding Replacement (Rainier) >> Removal Procedure

Removal Procedure

  1. Open the hood.
    2. Fig 1: View Of Front Hood Molding (Rainier)
    GM1277220Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolts that retain the hood molding (1) to the hood.
  3. Release the clips that retain the hood molding to the front of the hood.
  4. Remove the hood molding from the hood.
scientia non olet · About LEMON Manuals