LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Heated Glass/Defoggers >> Fixed & MOVEABLE Window Systems >> Repair Instructions >> Sealing Strip Replacement - Rear Door Window Belt Inner >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Sealing Strip (Rear Door Window Belt Inner)
    GM691018Courtesy of GENERAL MOTORS CORP.
  1. Open the door.
  2. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  3. Starting at the back of the strip, carefully lift the strip off the pinch-weld flange until the strip is completely released.
scientia non olet · About LEMON Manuals