LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting Systems >> Repair Instructions >> Park/Turn Signal/Side Marker Lamp Bulb Replacement (Envoy) >> Removal Procedure

Removal Procedure

  1. Open the hood.
  2. Remove the headlamp. Refer to Headlamp Bulb Replacement (Envoy, Rainier)  or Headlamp Bulb Replacement (TrailBlazer) .
  3. Fig 1: Identifying Retaining Tabs, Headlamp Electrical Connector, Side Marker Socket & Park/Turn Socket
    GM742005Courtesy of GENERAL MOTORS CORP.
  4. Rotate the bulb and socket counterclockwise in order to remove the bulb and socket from the housing.
  5. Remove the side marker bulb (3) or turn signal/park bulb (4) from the socket.