LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Diagnostic Information and Procedures >> Speedometer and/or Odometer Inaccurate or Inoperative (4.2L Engine) >> Circuit/System Testing

Circuit/System Testing

  1. Ignition ON, perform the segments test with the scan tool.
    • If not all of the segments illuminate, replace the IPC.
  2. Raise the vehicle drive wheels. Refer to Lifting and Jacking the Vehicle .
  3. Ignition ON, engine ON, transmission in Drive, verify the scan tool Vehicle Speed Sensor parameter in the IPC matches the speedometer display.
    • If the Vehicle Speed Sensor parameter does not match the speedometer display, test the vehicle speed signal circuit for a high resistance.
  4. If the circuit tests normal, test or replace the IPC.
scientia non olet · About LEMON Manuals