LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting Systems >> Repair Instructions >> Tail Lamp Replacement (TrailBlazer) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Tail Lamp Assembly Removed
    GM718032Courtesy of GENERAL MOTORS CORP.
  1. Remove the 2 screws that retain the tail lamp assembly to the body.
  2. Pull the assembly directly rearward in order to release the 2 locking pins.
  3. Disconnect the tail lamp electrical connector.
  4. Remove the lamp assembly from the vehicle.
  5. Remove the tail lamp circuit board. Refer to Tail Lamp Circuit Board Replacement .
scientia non olet · About LEMON Manuals