Speakers - One Channel Inoperative
IMPORTANT:
The following information lists the most probable cause of the concern to the least probable cause. If the list leads to the replacement of a component, always inspect for a poor connection before proceeding with replacement. Refer to Testing for Intermittent Conditions and Poor Connections
.
IMPORTANT:
The following procedure assumes all speakers are operative for all modes of operation except digital radio.
With RPO U2K
- Remote radio audio signal circuit open-Test the appropriate remote radio audio signal circuit for an open. Refer to Circuit Testing and Wiring Repairs .
- No audio output from the digital radio receiver-Replace the digital radio receiver. Refer to Control Module References .
- No digital radio audio output from the radio-Replace the radio. Refer to Control Module References .