LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> Ascender 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 312 (Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2)) >> Specifications >> 2-4 Servo Pin Selection

2-4 Servo Pin Selection

WARNING: This page is about a different car, the 2008 Isuzu Ascender, 2008 GMC Envoy, and 2008 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: 2-4 Servo Pin Selection
GM13129Courtesy of GENERAL MOTORS CORP.
2-4 Servo Pin Selection

Pin Length Pin Identification
mm inch
65.82-66.12 2.59-2.60 1 Groove
67.23-67.53 2.65-2.66 2 Grooves
68.64-68.94 2.70-2.71 No Groove
scientia non olet · About LEMON Manuals