Wiper Park Replacement - Rear

WIPER PARK REPLACEMENT - REAR

REMOVAL PROCEDURE




1. Remove the liftgate interior trim panel.
2. Remove the 2 bolts retaining the wiper arm park ramp to the liftgate.
3. Remove the wiper arm park ramp from the vehicle.

INSTALLATION PROCEDURE




1. Install the wiper arm park ramp to the vehicle.
2. Install the 2 bolts retaining the wiper arm park ramp to the liftgate.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the 2 bolts to 9 N.m (79 lb in).

3. Install the liftgate interior trim panel.