LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2006 >> Ascender 2WD V8-5.3L >> Repair and Diagnosis >> Technical Service Bulletins >> All Technical Service Bulletins >> Body - New Metal Fuel Filler Tube W/O Flapper Door

Body - New Metal Fuel Filler Tube W/O Flapper Door

2007 Service Bulletins

Information IB07-02-S002

Issue Date: APRIL 2007

Elimination Of Fuel Filler Tube Flapper Door

Affected Vehicles

2006 Isuzu Ascender

2006 Isuzu i-280/i-350 (TI)

New Metal Fuel Filler Tubes Without a Flapper Door

A revised style of fuel filler tube has changed materials from plastic to metal construction. On plastic fuel filler necks, the metal flapper was included as a safe discharge point for static electricity. With the metal style of fuel filler tube, the entire neck serves as the static discharge point making the flapper redundant.

IMPORTANT:
Do Not attempt to change the fuel filler tube because the flapper is not present. Replacement fuel filler tubes will not be equipped with the lapper.





Disclaimer