Seat Switch Replacement - Power

Seat Switch Replacement - Power

Removal Procedure

1. Remove the switch bezel assembly from the seat assembly.
2. Remove the buttons from the switch.
3. Release the tabs that retain the seat switch to the seat bezel assembly.




4. Disconnect the electrical connector from the switch.
5. Remove the seat switch from the seat bezel assembly.

Installation Procedure

1. Connect the electrical connector to the switch.




2. Install the seat switch to the seat bezel assembly. Verify that the retaining tabs are fully seated.
3. Install the buttons on the switch.
4. Install the switch bezel assembly to the seat assembly.