Rear (TrailBlazer EXT, Envoy XL)

SEAT BELT SIDE BUCKLE REPLACEMENT - REAR (TRAILBLAZER EXT, ENVOY XL)

REMOVAL PROCEDURE




1. Remove the 3 screws securing the inboard rear seat back hinge cover.




2. Remove the seat belt side buckle nut (2).
3. Remove the seat belt side buckle (1) from the seat.

INSTALLATION PROCEDURE




1. Install the seat belt side buckle (1) to the seat with the seat belt anchor nut (2).

Tighten the seat belt side buckle nut to 55 N.m (40 lb ft).

NOTE: Refer to Fastener Notice.




2. Install the inboard rear seat back cushion latch cover with 3 screws.

Tighten the rear seat back cushion latch cover screws to 2 N.m (18 lb in).