Seat Back Latch Bracket - Rear

Seat Back Latch Bracket - Rear

Removal Procedure

1. Remove the seat back from the vehicle.




2. Remove the bolts (2) that retain the latch bracket to the seat hinge.
3. Remove the latch bracket from the seat hinge.

Installation Procedure

1. Position the latch bracket to the seat hinge.

Notice: Refer to Fastener Notice in Service Precautions.




2. Install the latch bracket bolts (2) that retain the latch bracket to the seat hinge.

Tighten the latch bracket bolts to 35 N.m (26 lb ft).

3. Install the seat back to the vehicle.