Console Storage Bin Replacement

Console Storage Bin Replacement

Removal Procedure




1. Open the storage bin cover.
2. Remove the rubber mats covering the retaining screws
3. Remove the 6 screws that retain the storage bin to the console.
4. Remove the storage bin from the console.

Installation Procedure




1. Install the storage bin to the console.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the 6 screws that retain the storage bin to the console.

Tighten the screws to 2.5 N.m (22 lb in).

3. Install the rubber mats covering the retaining screws.
4. Close the storage bin cover.