Antenna Extension Cable Replacement

ANTENNA EXTENSION CABLE REPLACEMENT

REMOVAL PROCEDURE
1. Remove the inflatable restraint instrument panel (IP) module.




2. Disconnect the antenna cable (2) from the radio extension cable.




3. Remove the cable attachments (1) from the IP support bars.

IMPORTANT: Note the location of the radio extension cable before removal.

4. Reach through the IP compartment to disconnect the antenna cable from the radio.
5. Remove the radio extension cable from the vehicle.

INSTALLATION PROCEDURE




1. Position the radio extension cable to the IP support bars as previously noted.
2. Reach through the IP compartment to connect the antenna cable to the radio.
3. Install the radio extension cable attachments (1) to the IP support bars.




4. Connect the antenna cable (2) to the radio extension cable.
5. Install the inflatable restraint module.