A/T Shift Indicator Light Bulb: Removal

Disconnect the battery ground cable.
Pry up the bended portions(2) of the metal cover(1).

Fig 1: Prying Up Bended Portions Of Metal Cover
Courtesy of ISUZU MOTOR CO.
Remove the meter lense(3) from the meter visor(4).
Remove the meter visor from the meter case(5).

Fig 2: Removing Meter Lense From Meter Visor
Courtesy of ISUZU MOTOR CO.
Remove the meter assembly.
- Push the metal cover(6) with the screw driver(7).
Fig 3: Pushing Metal Cover With Screw Driver
Courtesy of ISUZU MOTOR CO.
Remove the meter rear cover.
Remove the meter circuit board.
Remove the A/T shift indicator bulb.