Rear Heater Duct, Defroster Nozzle, Ventilation Duct And Associated Parts: Removal
- Disconnect the battery ground cable.
- Remove instrument panel assembly.
- Refer to INSTRUMENT PANEL ASSEMBLY .
- Remove center ventilation duct and side defroster duct.
- Remove 5 screws.
- Remove instrument panel brackets w/suspension control unit.
- Refer to step 23 under INSTRUMENT PANEL ASSEMBLY .
- Remove cross beam assembly.
- Refer to step 23 under INSTRUMENT PANEL ASSEMBLY .
- Remove ventilation lower duct.
- Remove rear heater duct.
- Remove foot rest carpet and 3 clips.
- Remove defroster nozzle.