LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2002 >> Axiom Base, RWD >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shaft System >> Rear Propeller Shaft >> Rear Propeller Shaft And Associated Parts >> Installation

Rear Propeller Shaft And Associated Parts: Installation

NOTE: Never install the shaft assembly backwards.

Never insert bar between yoke lugs when tightening or removing bolts. 

Completely remove the dust or foreign matter from the connecting surface of flange coupling on each end of the propeller shaft. 

  1. Align the mark which is applied at removal.
  2. Install rear propeller shaft and tighten the bolts to the specified torque.

Torque:  63 N.m (46 lb ft)

scientia non olet · About LEMON Manuals