Brake Pull

Check for equal tire inflation pressure. Adjust as necessary.
Check front wheel alignment. Adjust as necessary.
Check for unmatched tires on same axle. Tires with approximately the same amount of tread should be used on the same axle.
Check for restricted brakelines or hoses. Check for soft hoses and damaged lines. Replace with NEW hoses and double-walled steel brakelines as necessary.
Check for water or oil on brake pads. Clean or replace as necessary.
Check for hardened brake pads. Replace as necessary.
Check brake pads for excessive wear. Replace as necessary.
Check for worn or scored brake rotor. Grind or replace as necessary.
Check for malfunctioning disc brake caliper. Clean or replace as necessary.
Check for incorrect front hub bearing preload. Adjust or replace as necessary.
Check for loose suspension parts. Check all suspension mountings.
Check for loose calipers. Check and tighten the bolts to specification.