Front Disc Brake Caliper: Removal
- Raise and support vehicle. Remove front wheels. Remove the bolt and gaskets, then disconnect the flexible hose from the caliper and after disconnecting the flexible hose, cap or tape the openings to prevent entry or foreign material.
- Since the brake fluid flows out from the connecting coupler, place a drain pan under the vehicle. Remove the pin bolt. See Fig 1. Remove the caliper assembly.
- Remove support bracket with pad assembly and take care not to damage the flexible brake hose when removing the support bracket. Remove the pad assembly with shim and mark the lining locations if they are to be reinstalled. Remove the clip.
Courtesy of ISUZU MOTOR CO.