Consoles And Associated Parts: Removal
- Disconnect the battery ground cable.
- Remove the cluster upper cover and connectors.
- Pry the knee pads.
- Remove the center cluster.
- Remove the six screws and pull out the center cluster at the six clip positions.
- Disconnect the connectors.
- Remove the rear console assembly.
- Open the rear console lid and remove two screws.
- Remove the front console assembly.
- Remove six fixing screws and disconnect the accessory socket connectors.
- Disconnect the seat heater switch connectors (if so equipped).
- Remove the CD changer.
- Remove the four fixing bolts and the connector.