Amigo, Passport, Rodeo, SLX & Trooper

1. Loosen clutch master cylinder push rod lock nut. Rotate push rod until clutch pedal height (from floor panel) is within specification. See CLUTCH PEDAL HEIGHT & FREE PLAY  table. Tighten lock nut after adjustment. See Fig 1.
2. On models with cruise control, rotate clutch switch until plunger is fully retracted against clutch pedal arm. Back switch out 1/2 turn and tighten lock nut. On models without cruise control, turn clutch pedal adjusting bolt until it contacts clutch pedal arm.

Fig 1: Measuring Clutch Pedal Height (Typical)

Courtesy of ISUZU MOTOR CO.

CLUTCH PEDAL HEIGHT & FREE PLAY

Application	Free Play In. (mm)	Pedal Height In. (mm)
Hombre	N/A	N/A
Passport & Rodeo	7.01-7.40 (178-188)	.20-.59 (5-15)
SLX & Trooper	8.6-9.0 (218-229)	.2-.6 (5-15)