LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1998 >> Trooper S, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Removal & Installation >> Torsion Bar >> Installation (Hombre)

Installation (Hombre)

To install, reverse removal procedure. Use Loading tool (J-36202) to adjust torsion bar, using same number of turns recorded in removal procedure. Check riding height. See RIDING HEIGHT  under ADJUSTMENTS & INSPECTION. Tighten fasteners to specification. See TORQUE SPECIFICATIONS .

NOTE: Torsion bar ends are marked "L" (Left) or "R" (Right) for location reference. Torsion bar must be installed in correct location.
scientia non olet · About LEMON Manuals