LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1998 >> Trooper S, Standard >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Steering System - Power >> Overhaul >> Worm Shaft, Stub Shaft & Valve Body (Hombre) >> Inspection

Worm Shaft, Stub Shaft & Valve Body (Hombre): Inspection

  1. Clean components using solvent, and blow dry. Inspect stub shaft for nicks and burrs. Remove nicks and burrs using crocus cloth if possible. Inspect shaft pin for wear and cracks.
  2. Check valve spool fit in valve body. Remove nicks and burrs using crocus cloth if possible. Lubricate valve spool with power steering fluid. Rotate valve spool in valve body. If valve spool does not rotate freely, replace complete valve and stub shaft assembly.
  3. Valve assembly is balanced during assembly. If replacing any components other than rings or seals, replace complete valve and stub shaft assembly.
scientia non olet · About LEMON Manuals