LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1998 >> Trooper S, Standard >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> A/C Compressor Servicing >> ZEXEL Rotary Vane >> Clutch Coil & Bearing >> Removal

Clutch Coil & Bearing: Removal

  1. Using clutch disc/plate holder, remove clutch disc/plate bolt. Using puller and forcing screw, remove clutch disc/plate. See Figure .
  2. Remove shim(s) and snap ring. On DKV-14D compressor, use pulley puller pilot to protect compressor shaft. Use a puller to remove pulley. Remove screw for clutch coil lead. Remove 3 clutch coil screws and clutch coil.
scientia non olet · About LEMON Manuals