LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1998 >> Trooper S, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Drive Belt Routing & Adjustment >> Drive Belt Adjustment

Drive Belt Adjustment

DRIVE BELT ADJUSTMENT SPECIFICATIONS

Application Specification
Amigo, Rodeo & Passport (1998) (1)
Hombre (1997 & 1998) (1)
Passport, Rodeo & Trooper - 2.6L & 3.2L (1997)
All Belts (2) 3/8" (10 mm)
A/C Belt (3) 80-120 lbs. (36-54 kg)
Generator & Fan Belt (3) 100-120 lbs. (45-54 kg)
P/S Belt (3) 70-110 lbs. (32-50 kg)
SLX & Trooper (1998) (1)
(1) Serpentine belt tension is automatically adjusted.
(2) Belt deflection, deflection is checked with 22 lbs. (10 kg) pressure applied midway on longest belt run.
(3) Check belt tension using belt tension gauge. Specification is for used belt (any belt which has been in operation for at least 10 minutes).
scientia non olet · About LEMON Manuals