LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1998 >> Trooper S, Standard >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Differentials & Axle Shafts - Front >> Removal & Installation >> Front Wheel Bearing >> Removal & Installation (Hombre)

Removal & Installation (Hombre)

  1. Raise and support vehicle. Using Torsion Bar Loader/Unloader (J 36202), unload torsion bars. Record number of turns required to unload torsion bars for installation reference. Remove wheel. Insert a drift or large screwdriver through the brake caliper and rotor vanes, or you can have an assistant apply the brakes.
  2. Remove hub nut and washer. Remove brake caliper and wire aside. Remove bolts securing bearing and hub assembly to axle shaft. To install, reverse removal procedure. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals