Removal & Installation (Hombre)
- Raise and support vehicle. Remove front wheels. Disconnect hydraulic flex hose from caliper, and plug openings. Remove caliper-to-support bracket bolts. Remove caliper and disc pads from rotor. Replace disc pads and resurface (or replace) rotor as necessary. Inspect caliper for leakage and repair as necessary.
- To install, apply Silicone grease to caliper sliding surfaces. Install caliper and pads on caliper support bracket. Tighten caliper mounting bolts to 37 ft. lbs. (50 N.m). Compress outer pad ears to caliper. Using NEW gaskets, install hydraulic flex hose to caliper. Hose must not contact moving or vibrating parts. Install wheels. Bleed hydraulic system.