LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1998 >> Rodeo LS, 2.2 D >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Overhaul >> Disc Brake Caliper >> Reassembly (Amigo, Rodeo & Trooper Front & Rear)

Reassembly (Amigo, Rodeo & Trooper Front & Rear)

Lubricate seal ring, piston and caliper bore with brake fluid. Install NEW seal ring and dust boot on piston. Press caliper piston into bore. Install dust boot seal ring (if equipped). Install all necessary guide pin and caliper bolt dust boots. Install bleed valve. Install caliper and bleed brakes.

Fig 1: Exploded View Of Caliper Assembly (Amigo, Rodeo & Trooper - Front Shown; Rear Is Similar)
G97I11914Courtesy of ISUZU MOTOR CO.