LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1997 >> Oasis LS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustments >> Brake Pedal Height & Free Play >> Pedal Height

Pedal Height

  1. Disconnect brake switch connector. Loosen brakelight switch lock nut and back off switch until it no longer touches brake pedal. Remove floor mat and measure pedal height from left side center of pedal pad. See Figure .
  2. Loosen brake pedal push rod lock nut, and screw push rod in or out until correct pedal height is obtained. Pedal height should be 9.25" (235 mm). Tighten lock nut to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals