Riding Height

Before adjusting wheel alignment, verify vehicle riding height. Bounce the vehicle several times and allow the suspension to settle. Make sure riding height is within specification. Refer to the RIDING HEIGHT SPECIFICATIONS table.
Front riding height distance "Z" is measured by subtracting distance "B" from distance "A". See Fig 1 . Rear riding height is measured between top of rear axle and rubber bumper.

RIDING HEIGHT SPECIFICATIONS

Application

Front: In. (mm)

Rear: In. (mm)

Trooper

5.08 (129)

⁽¹⁾

⁽¹⁾	Information is not available from manufacturer.

Fig 1: Measuring Riding Height

Courtesy of ISUZU MOTOR CO.