LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1994 >> Trooper S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Removal & Installation - M/T) >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 1994 Isuzu Rodeo and 1994 Honda Passport. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Crossmember Bolt 58 (79)
Drive Shaft Flange Bolt 46 (62)
Flywheel-To-Crankshaft Bolt (1) 40-47 (54-64)
Master Cylinder Fluid Line Nut 12-16 (16-22)
Master Cylinder Mounting Bolt 12-14 (16-19)
Pressure Plate-To-Flywheel Bolt (2) 12-15 (16-20)
Rear Transmission Mount Bolt 61 (83)
Release Cylinder Fluid Line Nut 12-16 (16-22)
Release Cylinder Mounting Bolt 12-14 (16-19)
Release Lever Ball Stud Nut 29 (39)
Release Lever Bridge Bolt 28 (38)
Shift Lever Cover Bolt 15 (20)
Skid Plate Bolt 27 (37)
Starter Bolt 30 (41)
Transmission-To-Engine Bolt 28 (38)
(1) Install NEW bolts and apply Loctite (262) to bolt threads. Tighten bolts in a diagonal pattern.
(2) Tighten bolts in a diagonal pattern.