Shift Control Cables: I-Mark
WARNING: This page is about a different car, the 1988 Isuzu Trooper II, 1988 Isuzu Pickup, 1988 Isuzu Impulse, and 1988 Isuzu I-Mark. However, it is still accessible from the selected car via links, so may be relevant.
Place transaxle and gearshift lever in Neutral. Working with one control cable at a time, loosen adjustment nuts and turn until shift lever is in a 90° angle to housing as viewed from side and rear. Tighten adjustment nuts. See Fig 1 .