LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1994 >> Trooper S, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.2L V6 - VINS [V,W] >> Removal & Installation >> Cylinder Head >> Removal

Cylinder Head: Removal

  1. Release fuel pressure. See FUEL PRESSURE RELEASE  under REMOVAL & INSTALLATION. Disconnect battery cables. Mark hood and hood hinge for reassembly reference. Remove hood from vehicle.
  2. Drain engine coolant. Remove air cleaner assembly. Remove upper fan shroud and upper radiator hose. Remove radiator cooling fan assembly. Remove upper and lower intake manifolds. See UPPER INTAKE MANIFOLD  and LOWER INTAKE MANIFOLD under REMOVAL & INSTALLATION.
  3. Disconnect coolant manifold from rear of cylinder heads. Remove thermostat housing. Remove all accessory drive belts. Remove power steering pump and cooling fan pulley assembly.
  4. Using Puller (J-8614-01), remove crankshaft pulley bolt and pulley. Remove oil cooler hose from timing cover. Remove timing belt. See TIMING BELT  under REMOVAL & INSTALLATION. Remove cylinder head covers. Remove power steering bracket. Disconnect front exhaust pipes from both exhaust manifolds. Remove cylinder heads and gasket.
scientia non olet · About LEMON Manuals