LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1994 >> Trooper S, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.2L V6 - VINS [V,W] >> Removal & Installation >> Cylinder Head Covers >> Removal & Installation (SOHC Left Side)

Removal & Installation (SOHC Left Side)

  1. Remove plug wires at spark plugs. Disconnect PCV hose from intake manifold and vacuum hose from throttle body.
  2. Detach wiring harness from cylinder head cover. Remove EGR pipe and valve. Remove bolts and cylinder head cover.
  3. To install, clean sealing surfaces. Apply RTV sealant to corners of end camshaft towers and install NEW gasket. See Fig 1. To complete installation, reverse removal procedure. Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS .
Fig 1: Applying Sealant To Camshaft Towers
G93B01590Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals