LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1994 >> Trooper S, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.2L V6 - VINS [V,W] >> Engine Oiling >> Oil Pump >> Reassembly & Installation

Reassembly & Installation

  1. To reassemble, reverse disassembly procedure. Lubricate all components with engine oil. Install oil seal using Seal Installer (J-35269). Tighten oil pump assembly bolts to specification. See TORQUE SPECIFICATIONS .
    NOTE: Ensure oil pump gears rotate smoothly after oil pump cover bolts are tightened to specification.
  2. To install, reverse removal procedure. Apply Sealant (TB-1207B) to oil pump gasket surface before installing oil pump. Tighten all bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals