LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1994 >> Trooper S, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shafts & Universal Joints >> Overhaul >> Drive Shaft >> Disassembly & Reassembly (Rear)

Disassembly & Reassembly (Rear)

  1. Before disassembling rear drive shaft, apply alignment marks on the sleeve yoke and tube assembly. See Fig 1.
  2. Remove seal. See Fig 2.
  3. Remove tube assembly.
  4. To reassemble, reverse disassembly procedure.
Fig 1: Marking Rear Drive Shaft Slip Yoke
G00168751Courtesy of ISUZU MOTOR CO.
Fig 2: Disassembling Rear Drive Shaft
G00168752Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals