LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1994 >> Trooper S, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Front Suspension >> Suspension - Front >> Removal & Installation >> Steering Knuckle >> Removal

Steering Knuckle: Removal

  1. Raise and support vehicle. Remove wheels. Remove disc brake caliper, and wire aside. Remove hub and rotor assembly. See WHEEL BEARING R & I  under REMOVAL & INSTALLATION. Remove tie rod from knuckle arm.
  2. Remove backing plate from steering knuckle. Support lower control arm. Remove cotter pin and nut from upper and lower ball joints. See Figure . Separate ball joints from steering knuckle. Remove steering knuckle.
scientia non olet · About LEMON Manuals