LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1994 >> Trooper S, Standard >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> A/C Compressor Servicing >> ZEXEL 6-Cylinder >> Clutch Coil & Bearing >> Removal

Clutch Coil & Bearing: Removal

  1. Using Clutch Plate Holder (J-33939), remove clutch plate bolt. Using Puller (J-33944-A) and Forcing Screw (J-33944-4), remove clutch plate.
  2. Remove shim(s), snap ring, and cover. Using Pulley Puller Pilot (J-38324), Pulley Puller (J-8433), and Pulley Puller Legs (J-24092), remove pulley. Remove screw for clutch coil lead. Remove 3 screws and clutch coil.
scientia non olet · About LEMON Manuals