LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1994 >> Trooper S, Standard >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Differential & Axle Shafts - Rear Removable Carrier >> Removal & Installation >> 1-Piece Drive Shaft >> Removal & Installation

Removal & Installation

  1. Raise and support vehicle. Mark drive shaft flange and pinion flange for installation reference. Remove pinion flange bolts. Slide drive shaft forward slightly. Lower rear of drive shaft.
  2. Slide shaft to rear to remove. Cap transmission opening to prevent fluid loss. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS.
scientia non olet · About LEMON Manuals