LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1993 >> Stylus Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [6] & 1.8L 4-CYL - VIN [8] >> Removal & Installation >> Lower Intake Manifold >> Removal & Installation (SOHC)

Removal & Installation (SOHC)

  1. Disconnect negative battery cable. Remove upper intake manifold. See UPPER INTAKE MANIFOLD  under REMOVAL & INSTALLATION. Remove fuel injector rail bracket retaining bolts from lower intake manifold.
  2. Release fuel pressure. See FUEL PRESSURE RELEASE  under REMOVAL & INSTALLATION. Remove lower intake manifold bolts and nuts. Remove lower intake manifold and gasket. To install, reverse removal procedure. Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals