LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1993 >> Stylus Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VIN [6] & 1.8L 4-CYL - VIN [8] >> Removal & Installation >> Oil Pan >> Removal

Oil Pan: Removal

  1. Disconnect negative battery cable. Raise and support vehicle. Drain engine oil. On SOHC engine, remove lower right engine cover. Disconnect exhaust pipe from exhaust manifold. On DOHC engine, remove split bar and center support.
  2. On both engines, disconnect torque rod at cylinder block and crossmember. Remove flywheel dust cover. Remove support bracket at rear of oil pan. Remove oil pan bolts, oil pan and gasket.
scientia non olet · About LEMON Manuals