LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1993 >> Stylus Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Drum Brake Shoes >> Removal (1.6L)

Removal (1.6L)

  1. Remove brake drum. Remove hold-down springs with cups and pins. Detach upper and lower return springs. Remove primary shoe and automatic adjuster assembly.
  2. Detach parking brake cable from automatic adjuster lever. Remove secondary shoe from backing plate. Remove clip and wave washer. Separate adjuster lever components from secondary shoe. See Fig 1 .
Fig 1: Exploded View Of Rear Drum Brake Assembly (Typical 1.6L)
G90D02977Courtesy of ISUZU MOTOR CO.