LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1993 >> Stylus Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Component Testing >> Oil Pressure Gauge

Oil Pressure Gauge

  1. Remove instrument cluster. See INSTRUMENT CLUSTER  under REMOVAL & INSTALLATION. Ensure all instrument cluster electrical connections are disconnected.
  2. Connect ohmmeter leads between oil pressure gauge IGN and UNIT terminals. SeeFig 1 . Resistance should be about 42 ohms. If reading is not as specified, replace oil pressure gauge.
Fig 1: Testing Oil Pressure Gauge
G93C01623Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals