LEMON Manuals: Even more car manuals for everyone

Home >> Isuzu >> 1992 >> Impulse XS, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VINS [4,5,6] & 1.8L 4-CYL - VIN [8] >> Removal & Installation >> Rear Crankshaft Oil Seal >> Removal

Rear Crankshaft Oil Seal: Removal

Remove transaxle, clutch assembly (if equipped) and flywheel. Carefully pry seal from seal housing to prevent damaging sealing surfaces on crankshaft.

scientia non olet · About LEMON Manuals