LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1992 >> Impulse XS, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VINS [4,5,6] & 1.8L 4-CYL - VIN [8] >> Removal & Installation >> Exhaust Manifold >> Removal (Non-Turbo)

Removal (Non-Turbo)

  1. Disconnect negative battery cable. Remove heat shield from exhaust manifold. Disconnect oxygen sensor wiring connector. Disconnect EGR pipe from exhaust manifold and EGR valve.
  2. Disconnect exhaust pipe from exhaust manifold. Remove exhaust manifold bolts and nuts, exhaust manifold and gasket.