LEMON Manuals: Even more car manuals for everyone

Home >> Isuzu >> 1992 >> Impulse XS, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.6L 4-CYL - VINS [4,5,6] & 1.8L 4-CYL - VIN [8] >> Removal & Installation >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

Lubricate seal lip with engine oil. Using Seal Installer (J-35269), install seal in oil pump housing. To install remaining components, reverse removal procedure.

scientia non olet · About LEMON Manuals